Extensions to the Arduino IDE 1.5.x series to support additional hardware
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Jean-Claude 6e082bda29 Create UNLICENSE 1 year ago
arm cleanup 3 years ago
avr * upload on Jeenode Micro @19200bps 5 years ago
README.md readme tweak 6 years ago



Extensions to the Arduino IDE 1.5.x series to support additional hardware.

This package adds a “JeeLabs AVR Boards” entry to the Tools -> Boards menu.

Installation and use

  • Make sure your IDE’s “Sketchbook location” contains a hardware folder
  • Download or “git clone” this project at https://github.com/jcw/ide-hardware
  • Rename the download to jeelabs (!) and put it inside that hardware folder
  • Restart the Arduino IDE if it was still running, so it’ll pick up the change
  • You should see a new “JeeLabs AVR boards” entry in the Tools -> Board menu
  • Select Tools -> Programmer -> Arduino as ISP
  • See this post on the JeeLabs weblog for ISP programming a JeeNode Micro
  • To set the fuses and optional boot loader, use Tools -> Burn Bootloader
  • To upload a sketch, you can then use the standard “Upload” button


GNU Lesser GPL, same as the original code (see below).


This code was adapted from http://code.google.com/p/arduino-tiny/:

Arduino-Tiny is an open source set of ATtiny “cores” for the Arduino platform.

The Arduino platform currently supports Atmel ATmega processors. There is a need for the Arduino platform to work with physically smaller DIP package processors. The intent of this project is fulfill that need. Specifically, our goal is to provide a core that enables Arduino users to work with the ATtiny84 (84/44/24), ATtiny85 (85/45/25), and ATtiny2313 processors.

More information is available in avr/readme.txt:

Arduino-Tiny is based on work by David A. Mellis, René Bohne, R. Wiersma, Alessandro Saporetti, and Brian Cook.

The main change was to move things around to insert an extra avr folder and to include the necessary boards.txt + platform.txt + programmers.txt files.